Wallace GP1 Build Instructions
Part 6
Mounting Z-Motors

Step 1

Parts

Parts needed:


MSpacer Set-up

Put Washer on each M3 Screw.

Thread M3x10 screws into Mspacers.

Screws & Washers in MSpacer

Mounting Z-Motors

Slide motor wires under the arch. Then slide Motor in until screw holes align. Then take 1 MSpacer assembly and screw on motor.

Z-Motor Z-Motor Placed

First side mounted

Slide Foot on until screw holes align. In this case the Hook Foot. Screw on with another

Hook FootCompleated mounting
Repeat with other side.
Next MotorSecond Motor mounted

Next Part 7